Product description
How to Use:
Connect the power supply and the
Product description
How to Use:
Connect the power supply and the load, then you can supply to the controller.
It displays the measured temperature, press SET key, the display temperature flashing, press"+" "-" to set the desired temperature. After finished, press SET to confirm and back.
Now the controller automatically performs the relay by setting off.
This temperature controller output is 10A relay, meeting various high-power loads, please make sure the wires are connected correctly.
Indicator, LED State Instruction:
Indicator: OFF indicates the relay is switched off; ALWAYS indicates the relay is closed.
LED: shows LL means the sensor opens; shows HH means it's out of range, the thermostat will be forced to close the relay, the display --- as high temperature protection.
Specifications:
Temperature Range: -50~110°C
Resolution: 0.1°C(-9.9~99.9°C), 1°C(Other Ranges)
Accuracy: 0.1°C
Refresh Rate: 0.5s
High Temperature Protection: 0~110°C
Input Power: DC 12V
Static Current: ≤35mA, Attract Current: ≤65mA
Measurement Input: NTC(10K 0.5%) Waterproof Type Sensor
Output Range: 1 Channel 10A Relay Output
Environment: -10~60°C, Humidity: 20%-85%
PCB Board Size: 48 * 40mm / 1.9 * 1.57in
Package Weight: 26g / 0.93oz
Antennas On-ground BLE-NFC combo PairMate
PMIC - Battery Management VDFN-8
Frequency Mixer, Level 13 (LO Power +13 dBm) 40 to 2500 MHz
5-18V power supply supported.- Serial USB TTL compatible for
5-18V power supply supported.- Serial USB TTL compatible for 2.85V, 3.3V and 5v signal- GSM, GPRS, GPS {text messaging, data transmission, positioning} triple function.
Switching Power Supplies 15.6W 12V 1.3A
Description
Connect your Raspberry Pi to GSM/GPRS cell p
Description
Connect your Raspberry Pi to GSM/GPRS cell phone network with this shield. This Raspberry Pi GSM/GPRS shield lets you connect to the internet in the areas where is devoid of Wi-Fi or Ethernet. Quectel M66 module is the heart of this Raspberry Pi add-on. M66 is a quad-band GSM/GRPS module based on the latest 2G chipset which has the optimal performance in SMS & Data transmission and audio service even in harsh environment. You can plug a headset and make a call to someone easily.
Both UART and USB communication with the M66 GSM module is available. The shield can be used easily via easy-to-use AT commands.
The compact form factor, low power consumption and extended temperature make M66 one of the best choices for M2M applications such as wearable devices, automotive, industrial PDA, personal tracking, wireless POS, smart metering, telematics, and more.
Features
Fully compatible with Raspberry Pi models that have the 40-pin GPIO header (3, 2, B+, A+, Zero)
High Data Speed: GPRS Multi-slot class 12, 85.6kbps downlink and 85.6kbps uplink data rates
Quad-band: 850/900/1800/1900MHz
Built-in PCB antenna, also there is an external antenna port available
Supported Protocols: TCP/ UDP/ PPP/ FTP/ HTTP/ SMTP/ CMUX/ SSL
Quectel’s QuecLocator Feature, lets you get the location without GPS/GNSS
Extremely low standby power consumption by M66, 1.3mA at DRX=5
Efficient and low quiescent current regulator circuit can hold up to 3.6A
Bluetooth Function, V3.0 specification, SPP and OPP profiles available.
Micro SIM Card socket can easily reachable on the downside of the shield.
Can be used standalone with PC/Laptop over micro USB, without stacking with Raspberry Pi thanks to FTDI chip on the shield.
Sending/Receiving standard V.25ter AT commands over UART port to Raspberry Pi is available
Working temperature range: -30°C to +80°C
Key Applications
Smart farming sensor
Smart cities sensor
Smart home sensor
Internet of Things (IoT) sensor
Smart door lock
Smart lightning
Smart metering
Bike sharing
Smart parking
Smart city
Security and asset tracking
Home appliances
Agricultural and environmental monitoring
Features
LoRaTM spread spectrum communi
Features
LoRaTM spread spectrum communication
+20dBm - 10mW. Stable RF output power when input voltage changed
Half-duplex SPI communication
Programmable bit rate can reach to 300kbps
Support FSK, GFSK, MSK, GMSK, LoRaTM and OOK Modulation Mode
127dB RSSI wave range.
Automatically detect RF signal, CAD mode, and super high-speed AFC
With CRC 256 bytes data engine
Half hole (castellated hole) SMD package
With metal shielding case
Spring antenna
Specifications
Wireless Standard: 433MHz
Frequency range: 420 - 450MHz
Port: SPI/GPIO
Operating Voltage: 1.8 - 3.7V, default 3.3V
Working Current, Receive: less than 10.8mA (LnaBoost closed, Band 1)
Transmit: less than 120mA (+20dBm),
Sleep model: 0.2uA
Working temperature: -40- +85 degrees
Pin pitch: 2.0 mm
Description:
Type : Voltage Regulator
Condition : N
Description:
Type : Voltage Regulator
Condition : New
Application : Computer
Supply Voltage : 1
Dissipation Power : 1
Model Number : MW
is_customized : Yes
Wireless Module : SMD NRF24L01
Isolated DC/DC Converters 5 Vdc, 3 A, 15 W, 9 ~ 36 Vdc Input Range
12*12*4mm namely PA012HAPI00 Patch Antenna On 13.4*12*0.5mm PCB With 30mm I-PEX Cable
Feature: ► Brand new and high quality. ► High sensitivity
Feature: ► Brand new and high quality. ► High sensitivity for low-light operation. ► Low operating voltage for embedded application. ► Standard SCCB interface compatible with I2C interface. ► Raw RGB, RGB (GRB4:2:2, RGB565/555/444),YUV(4:2:2) and YCbCr(4:2:2)output format. ► Support VGA, CIF and from CIF to 40 x 30 format. ► Vario Pixel method for sub-sampling. ► Auto Image Control: AEC, AGC, AWB, ABF, ABLC. ► Image Quality Control: Color saturation, hue, gamma, sharpness and anti-blooming. ► ISP includes noise reduction and defect correction. ► Support image scaling. ► Lens shading correction. ► Flicker 50/60Hz auto detection. ► Color saturation level auto adjust. ► Edge enhancement level auto adjust. ► De-noise level auto adjust. Parameter: ► Photosensitive Array: 640 x 480. ► IO Voltage: 2.5V to 3.0V. ► Operating Power: 60mW/15fpsVGAYUV. ► Sleeping Mode: <20μA. ► Operating Temperature: -30 to 70 deg C. ► Output Format: YUV/YCbCr4:2:2 RGB565/555/444 GRB4:2:2 Raw RGB Data (8 digit). ► Lens Size: 1/6". ► Vision Angle: 25 degree. ► Max. Frame Rate: 30fps VGA. ► Sensitivity: 1.3V / (Lux-sec). ► Signal to Noise Ratio: 46 dB. ► DynamicRange: 52 dB. ► Browse Mode: By row. ► Electronic Exposure: 1 to 510 row. ► Pixel Coverage: 3.6μm x 3.6μm. ► Duck Current: 12 mV/s at 60℃. ► PCB Size (L x W): Approx. 1.4 x 1.4 inch / 3.5 x 3.5 cm