ماژول

Isolated DC/DC Converters 5V/10A 9-36Vin 1/16brk -Log FLG BP

Module DC-DC 12VIN 1-OUT 0.7525V to 5.5V 5A 25.5W 5-Pin SIP

This module uses the newest 2.4ghz transceiver from Nordic Semiconductor, the nrf24l01+. It integrates a complete 2.4ghz RF transceiver, RF synthesizer, and baseband logic including the Enhanced shockburst™ hardware protocol accelerator supporting a high-speed SPI interface for the application controller. The ‘+’ version of the IC has improved range, sensitivity, and data rates. The command set is backward compatible with the original nrf24l01.Worldwide 2.4GHz ISM band…

Bluetooth Modules (802.15.1) BGM13P32F512GE Bluetooth module Supports high-throughput, long range, and regular Bluetooth LE PHYs

(Antennas WiFi Rail-Trackside, Directional 5 GHz, 23 dBi, Spot-L, IP 67, linear vertical polarized; SISO, Connector N (f

Description The HC-12 is a 100mW multi-channel wireless transceiver you can use in your projects to transmit and receive serial information. The HC-12 is a half-duplex wireless serial communication module with 100 channels in the 433.4-473.0 MHz range that is capable of transmitting up to 1 km. This project will begin by using the HC-12 to create a wireless link between two computers and end with a second article that creates a simple wireless GPS tracker.

AC/DC Power Supply Single-OUT 12V 5.96A 65W 6-Pin

About this item 32 bit MCU, 2.4 GHz Wi­Fi + Bluetooth LE SoC Supporting IEEE 802.11 b/g/n and Bluetooth 5 Based on ESP32-S3-WROOM-1 8MB Flash + 2 MB PSRAM About ESP32-S3 hardware resources ESP32-S3 is a low-power MCU-based SoC that supports 2.4 GHz Wi-Fi and Bluetooth Low Energy (Bluetooth LE). ESP32-S3 has a complete Wi-Fi subsystem and a Bluetooth LE subsystem, State-of-the-art power and RF performance. S3 provides a rich set of peripheral interfaces, and supports…

ESP8266 ESP-12F Serial WIFI Model ESP-12E Upgrade Remote Wireless WIFI Module ESP12F ESP12

DC DC CONVERTER 12V 50W

DC-DC Regulated Power Supply Module, 1 Output, 3.5475W, Hybrid

DescriptionChip board ENC28J60/SS.The board 25MHZ crystal.The network interface board HR911105A.3.3V power supply pin.Size: 48.8 (mm) x 18.5 (mm).

description:This wireless transceiver module is an easy and suitable module if you want to setup your wireless communication system with low cost!! It can achieve a good balance between wireless transition performance and cost! You can easily add it with your own MCU/ARM/PIC/AVR/STM32 system! What\'s more, this NRF24L01+ module is designed with Power amplifier and SMA antenna. This allowed you to use the wireless communication up to 1000 meters! (No barrier)Frequence: 2.4GHz~2.5GHzOperating…

Description:Arduino NANO with ATmega328 Microcontroller is an ultra-low size Arduino board with AVR architecture and based on Atmel Atmega328P-AU microcontroller, which includes all capabilities of Arduino Duemilanove except DC power jack in the smallest size.This miniature board is like an Arduino UNO type, but with a smaller size, which is suitable for a flyer and tiny robot. This Arduino is idealized for breadboard working too.The Arduino NANO is equipped with 8 pins for analog inputs (to…

Ethernet LAN Network Module for Arduino SPI AVR PIC LPC STM32