PMIC - Battery Management VDFN-8
5-18V power supply supported.- Serial USB TTL compatible for
5-18V power supply supported.- Serial USB TTL compatible for 2.85V, 3.3V and 5v signal- GSM, GPRS, GPS {text messaging, data transmission, positioning} triple function.
Switching Power Supplies 15.6W 12V 1.3A
Description
Connect your Raspberry Pi to GSM/GPRS cell p
Description
Connect your Raspberry Pi to GSM/GPRS cell phone network with this shield. This Raspberry Pi GSM/GPRS shield lets you connect to the internet in the areas where is devoid of Wi-Fi or Ethernet. Quectel M66 module is the heart of this Raspberry Pi add-on. M66 is a quad-band GSM/GRPS module based on the latest 2G chipset which has the optimal performance in SMS & Data transmission and audio service even in harsh environment. You can plug a headset and make a call to someone easily.
Both UART and USB communication with the M66 GSM module is available. The shield can be used easily via easy-to-use AT commands.
The compact form factor, low power consumption and extended temperature make M66 one of the best choices for M2M applications such as wearable devices, automotive, industrial PDA, personal tracking, wireless POS, smart metering, telematics, and more.
Features
Fully compatible with Raspberry Pi models that have the 40-pin GPIO header (3, 2, B+, A+, Zero)
High Data Speed: GPRS Multi-slot class 12, 85.6kbps downlink and 85.6kbps uplink data rates
Quad-band: 850/900/1800/1900MHz
Built-in PCB antenna, also there is an external antenna port available
Supported Protocols: TCP/ UDP/ PPP/ FTP/ HTTP/ SMTP/ CMUX/ SSL
Quectel’s QuecLocator Feature, lets you get the location without GPS/GNSS
Extremely low standby power consumption by M66, 1.3mA at DRX=5
Efficient and low quiescent current regulator circuit can hold up to 3.6A
Bluetooth Function, V3.0 specification, SPP and OPP profiles available.
Micro SIM Card socket can easily reachable on the downside of the shield.
Can be used standalone with PC/Laptop over micro USB, without stacking with Raspberry Pi thanks to FTDI chip on the shield.
Sending/Receiving standard V.25ter AT commands over UART port to Raspberry Pi is available
Working temperature range: -30°C to +80°C
Key Applications
Smart farming sensor
Smart cities sensor
Smart home sensor
Internet of Things (IoT) sensor
Smart door lock
Smart lightning
Smart metering
Bike sharing
Smart parking
Smart city
Security and asset tracking
Home appliances
Agricultural and environmental monitoring
Description:
Type : Voltage Regulator
Condition : N
Description:
Type : Voltage Regulator
Condition : New
Application : Computer
Supply Voltage : 1
Dissipation Power : 1
Model Number : MW
is_customized : Yes
Wireless Module : SMD NRF24L01
Isolated DC/DC Converters 5 Vdc, 3 A, 15 W, 9 ~ 36 Vdc Input Range
12*12*4mm namely PA012HAPI00 Patch Antenna On 13.4*12*0.5mm PCB With 30mm I-PEX Cable
Module DC-DC 12VIN 1-OUT 0.7525V to 5.5V 5A 25.5W 5-Pin SIP
NRF51822-02 module is a data transmission module, the BLE Blu
NRF51822-02 module is a data transmission module, the BLE Bluetooth MCU integrated SOC chip nRF51822-QAFF ,the internal integration of the underlying low power Bluetooth 4.0 standard protocol, module interface is the standard UART interface, built-in interrupt output prompt, When the module receives data from a pair of Bluetooth transmission, it outputs a high level signal, which is used to notify the external device, At the same time, the module is equipped with hardware.make enable foot,In the absence of data transfer,can be set to make the foot high,to disable the function of serial data transmission, thereby reducing the power consumption of the system.
Characteristic:
Low power BLE4.0 Bluetooth single mode chip
The integration of the standard BLE4.0 protocol stack
Standard UART (TTL) interface, can be directly connected to the external MCU serial or serial port
9600 or 38400 optional hardware serial baud rate, the default is 9600
Interrupt output prompt
Hardware enable control
Operating distance: 0~20 m,class II
Power supply voltage: 3.3V
The module comes with a PCB antenna, and can also use the external antenna
Module size: 16.5*28.8mm
Application case:
Short distance automatic data acquisition
Industrial remote control and telemetry
Handheld, handheld machine, POS machine
Wireless keyboard, wireless mouse, game handle
Bluetooth dimming, light control system
Intelligent home control system
Anti drop device
Bluetooth sensor
Mobile phone accessory products
Description:
Brand new and high quality.
Maximum op
Description:
Brand new and high quality.
Maximum operating speeds up to 2Mbps, GFSK modulation efficiency, Anti-interference ability, Particularly suitable for industrial control applications.
125 Channels, Multi-point communication and frequency hopping to meet the communication needs.
Built-in hardware CRC error detection, Multipoint communication address control.
Low-power 1.9 ~ 3.6V, only 1uA on Power down mode.
Built-in 2.4Ghz antenna.
Available software to set the address, only received local Address when output data(Provide interrupt instruction), can be directly connected to a variety of microcontrollers, Software programming is very convenient.
Built-in voltage regulator.
Standard DIP Pitch Interface for embedded applications.
Size:3.3cm x 1.4cm - 1.29inch x 0.56inch.
Package Includes:
1pc NRF24L01+ Wireless Transceiver Module
This module uses the newest 2.4ghz transceiver from Nordic Semiconductor, the nrf24l01+. It integ
This module uses the newest 2.4ghz transceiver from Nordic Semiconductor, the nrf24l01+. It integrates a complete 2.4ghz RF transceiver, RF synthesizer, and baseband logic including the Enhanced shockburst™ hardware protocol accelerator supporting a high-speed SPI interface for the application controller. The ‘+’ version of the IC has improved range, sensitivity, and data rates. The command set is backward compatible with the original nrf24l01.Worldwide 2.4GHz ISM band operation 250kbps, 1Mbps and 2Mbps on air data rates Ultra low power operation Power supply : 1.9~3.6V Dimension : 12x18mm
Description
ESP8266 is a highly integrated chip designed
Description
ESP8266 is a highly integrated chip designed for the needs of a new connected world. It offers a complete and self-contained Wi-Fi networking solution, allowing it to either host the application or to offload all Wi-Fi networking functions from another application processor.
Instruction & Steps of How to use:
1. Download the Arduino IDE, the latest version.
2. Install the IDE
3. Set up your Arduino IDE as: Go to File->Preferences and copy the URL below to get the ESP board manager extensions: http://arduino.esp8266.com/stable/package_esp8266com_index.json Placing the http:// before the URL lets the Arduino IDE use it...otherwise it gives you a protocol error.
4. Go to Tools > Board > Board Manager> Type "esp8266" and download the Community esp8266 and install.
5. Set up your chip as:
Tools -> Board -> NodeMCU 1.0 (ESP-12E Module)
Tools -> Flash Size -> 4M (3M SPIFFS)
Tools -> CPU Frequency -> 80 Mhz
Tools -> Upload Speed -> 921600
Tools-->Port--> (whatever it is)
6. Download and run the 32 bit flasher exe at Github(Search for nodemcu/nodemcu-flasher/tree/master/ at Github)
github.com/nodemcu/nodemcu-flasher/tree/master/Win32/Release
Or download and run the 64 bit flasher exe at:
github.com/nodemcu/nodemcu-flasher/tree/master/Win64/Release
7. In Arduino IDE, look for the old fashioned Blink program. Load, compile and upload.
8. Go to FILE> EXAMPLES> ESP8266> BLINK, it will start blinking.
System-On-Modules - SOM System-On-Modules - SOM Zynq-7020, 1GB DDR3, 4GB eMMC